US Digital will be closed on September 6th, 2010 in observance of Labor Day

US Digital

Shaft Incremental Encoder Selector Guide

  • Wide variety of models to suit most applications.
  • All models available with ball bearing on shaft.
  • Sleeve bushing option models are available with "no-torque" or with shaft torque to provide the correct "feel" for front panel human interface applications.
  • US Digital offers a number of external cable drivers to convert single-ended outputs to differential (for models that do not support differential output).
  • All models are available from stock with fast shipment.

 

 

 

 

 

 

 

 

 

EncoderCPR (Counts) RangeIndex OptionDifferential
Output
Option		Nominal
Shaft Diameter		Sealed
Housing
Option

High Voltage
Supply Option

Sleeve
Bushing
Option		Nominal
Disk
Diameter		MountingNotes
H1 32-1250 (128 - 5000) •   0.25" •     1" flange H5 recommended for new designs
H15 32-1250 (128 - 5000) • • 0.25"       1" flange Size 15 servo mount
H3 64-2500 (256 - 10000) •   0.25" •     2" flange  
H5 32-1250 (128 - 5000) • • 0.25"       1" flange  
H6 64-2500 (256 - 10000) • • 0.25"       2" flange  
HD25 64-2500 (256 - 10000) • • 0.375" • •   2" flange NEMA Size 25, Ruggedized model with machined aluminum housing
S1 32-1024 (128 - 4096) •   6mm, 0.25" •    • 1" panel S5 recommended for new designs
S2 64-2500 (256 - 10000) •   6mm, 0.25" •   • 2" panel S6 recommended for new designs
S4 100-360 (400 - 1440)     0.125", 6mm, 0.25"     • 0.65" panel Miniature size, low-power strobe option
S5 32-1250 (128 - 5000) • • 6mm, 0.25"     • 1" panel  
S6 64-2500 (256- 10000) • • 6mm, 0.25"     • 2" panel  
SP-16 16 (64)     0.25"     • 1" panel  

 

Related Content

Latest in Selector Guides