CE Marking: Starting July 22nd, 2014, some US Digital products will contain the CE Marking. The
PS-12 will not contain a CE Marking and will
not be available for shipping to CE Mark required countries (for example, all countries within the European Union (EU))
after July 10th, 2014. See the
Product Change Notification PCN 4464 for more information, or contact a US Digital representative at
sales@usdigital.com.
Material Compliance Statement: This product does NOT contain banned levels of substances as defined in European Directive 2011/65/EU. Specifically, Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (CR+6), Poly Brominated Biphenyls (PBB), and Poly Brominated Diphenyl Ethers (PBDE) are not found above the threshold level given in the 2011/65/EU Directive.
PS-12 Product Description
The PS-12 is an 18 W regulated switching power supply that outputs 12 VDC @ 1.5 A. The power supply covers voltage inputs ranging from 90 VAC to 264 VAC. Typical efficiency is 70%, and the output is short circuit protected.
The output connector is a 2.1 mm circular plug attached to a 48-inch-long cable. The power supply plugs directly into a standard 120 VAC receptacle.
Product Specifications
View here or download the specifications
SPECIFICATIONS
Input Voltage |
90 VAC to 264 VAC |
Output Voltage |
12 VDC ± 5% |
Input Frequency |
47 Hz to 63 Hz |
Ripple & Noise |
± 120 mV maximum |
Operating Temperature |
0 C to 40 C |
Storage Temperature |
-20 C to 80 C |
Protections |
Over voltage, over current and short circuit |
Certification |
UL/IEC/EN 60950-1, 2nd. ed. |
EMI |
FCC, EN55022, CISPR 22 Class B |
Efficiency |
DOE 2013 Level VI |
Size (inches) |
2.83 x 2.05 x 1.34 inches |
PRODUCT CHANGE NOTIFICATIONS
Title |
Date |
Description |
Download |
PCN 4464 - CE - RoHS |
6/30/2014 |
US Digital is aware of the increasing attention to world-wide environmental regulations, specifically with regard to the need for hazardous substance restrictions in electronic components and systems. As of July 10th, 2014 US Digital will now be CE Marking certain products inline with compliance under RoHS Directive (2011/65/EU). In order to achieve RoHS Compliance, the products will not contain more than the acceptable levels of the listed restricted substances within the RoHS 2011/65/EU directive.
Part Numbers Affected:
- ED3
- USB4
- QSB
- SEI-USB
- MD2S
- PS-5, PS-12, PS-24, PS-48 (Power Supplies)
- PE
For the part numbers listed above, US Digital cannot confirm that they meet Low-Voltage and EMC Directives and for that reason US Digital cannot support shipping those products / product families into the CE required countries (For Example countries in the EU). Those products can still be shipped to Non-CE required countries with a Statement of Material Conformance to the RoHS Directive 2011/65/EU, in place of a RoHS Compliance Declaration.
|
Download |
Additional Information
Product Notes
-
US Digital® warrants its products against defects in materials and workmanship for two years. See complete warranty for details.
Datasheets
Related
Product Configurator
Our products are not currently available for direct online purchase. To place an order please contact us directly with your part number.
For purchasing or volume discounts, please configure the part above, then use the completed part number and contact us!
Feedback
US Digital's mission is a commitment to quality and constant improvement. If you find an error to a product on this page, please let us know!