Centering Tool CTOOL & MCTOOL

CTOOL & MCTOOL Product Description

During assembly, this reusable tool is designed as a simple method for accurately locating the encoder base relative to the shaft to promote concentricity, thereby providing the highest possible encoder accuracy.

Note: Variations of the CTOOL are designed for the E2, E3, E5, E6, E8T, E16, EC35, and M3K. The E4T uses the MCTOOL. Please make your selection in the Product Configurator accordingly.

General Instructions: When mounting the encoder base, slide the centering tool down the shaft until it slips into the centering hole of the encoder base. Tighten the encoder base mounting screws, then remove the centering tool. For additional information, please refer to the specific product's assembly instructions.

Additional Information

Product Notes

  • US Digital® warrants its products against defects in materials and workmanship for two years. See complete warranty for details.

Downloads Available

Datasheets

Related Products & Accessories

The following are related products for the Centering Tool

Product Configurator

For pricing, this product requires configuration.

Begin by completing either Option 1 or 2 below. Questions? Contact our support team.

Option 1: Configure the Product

Use the configuration tool to provide information regarding your product needs. Not sure what to do or need additional assistance? Our support team is here to help.

We recommend enabling Javascript when using the product configurator.

Copied the URL to the clipboard!

Our products are not currently available for direct online purchase. To place an order please contact us directly with your part number.

For purchasing or volume discounts, please configure the part above, then use the completed part number and contact us!


Feedback

US Digital's mission is a commitment to quality and constant improvement. If you find an error to a product on this page, please let us know!